The PAM-840A is a wideband, high gain, bench top microwave preamplifier. The PAM-840A has a frequency range of 18 GHz to 40 GHz. This preamplifier is primarily intended for EMC applications, however, it may be used for other applications that require low noise and high signal amplification.
The simple front panel consists of two 50 Ohm matched air core 2.9 mm connectors for input and output. The preamplifier was designed to have flat gain with minimal variation over the entire frequency range. The flat gain helps in taking fast adhoc readings during troubleshooting and R&D phases. The high gain and low noise figure of PAM-840A increases system sensitivity of effectively all measurement systems.
It is very effective in measuring low level signals during Electromagnetic Interference (EMI) testing. It has low VSWR and high reverse isolation. The PAM-840A preamplifier increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.Features:
|Frequency Range:||18 GHz to 40 GHz|
|Flatness:||± 2 dB|
|RF Input / Output:||50Ω / 2.9mm female|
|VSWR:||2.25 : 1 (max)|
|Noise Figure:||< 5 dB @ 25°C|
|P out @ 1 dB Compression:||+10 dBm (min)|
|DC input:||0 VDC (max)|
|Reverse Isolation:||40 dB (typical)|
|DC Power supply:||+15 VDC / 500 mA|
|Size:||19.2 cm x 15.1 cm x 5.5 cm / 7.6" x 5.95" x 2.17"|