The C50E model Coupling Decoupling Network (CDN) is developed for injecting disturbance signals on to screened coax cables. CDNs are used for testing devices for conducted immunity according to IEC / EN 61000-4-6. The CDN-C50E is specifically for testing devices that uses 50 Ohm coaxial cables for data transmission.
This model CDN has 50 Ohm BNC connectors for both Equipment under Test (EuT) and Associated Equipment (AE) power connection. It can handle up to 1 Ampere of current and 40 Volt of Radio Frequency (RF) Input Voltage. The coupling port for RF disturbance signal is BNC (female). Effectively grounding the device is easily achieved due to the non-painted bottom surface of this CDN.
The CDN-C50E meets the requirements stated in IEC 61000-4-6 and CISPR 16-1-2 standards.Features:
|Product Name:||Coupling Decoupling Network (CDN)|
|Compliant Test Standards:||IEC / EN 61000-4-6|
|Application:||50 Ohm Coaxial Cables|
|Frequency Range:||150 kHz to 230 MHz|
|RF Input Voltage:||40V (Max)|
|RF Input Connector:||50 Ω BNC (Female)|
|Voltage Rating:||310 VAC / 440 VDC (Line to Ground)|
|Current Rating:||1 Ampere|
|Voltage Division Factor:||9.5 dB +3 / -1|
|AE and EUT Connections:||50 Ohm|
|Decoupling of Common Mode Disturbance:||≥ 40 dB (EUT/AE)|
|Dimensions:||15.2 cm x 15.2 cm x 33 cm / 6" x 6" x 13"|