The CLA-150 absorbing clamps meet the CISPR 14 (EN 55014) section 6.11 requirement for measuring radio frequency power generated and fed to the EUT supply cable of electrical instruments via their connecting leads.
Use of an absorbing clamp is a practical alternative to measurement of direct field strength from equipment under test (EUT) supply cables.
During the test, the equipment under test is placed on a non-conductive table at least 40 cm from the nearest reflecting object. The EUT mains conductor is placed horizontally in a straight line for a distance sufficient to permit movement of the absorbing clamp to obtain the highest readings. The mains conductor is placed in the clamp surrounded by absorbing rings and the current transformer
The EMC clamp model CLA-150 can accommodate supply cables up to 32 mm (1.26 inches) in diameter. Our model CLA-050 ferrite absorbing clamp can accept cables up to 10 mm (0.39 inches).Features:
|Application:||EMC emissions measurement of electrical instruments|
|Frequency Range:||30 MHz to 1000 MHz|
|RF Connectors:||BNC (female)|
|Max. Cable Diameter:||32 mm / 1.26 inches|
|Aperture Size:||34.9 mm / 1.37 inches|
|Dimensions:||627 mm x 114 mm x 165 mm / 24.7" x 4.5" x 6.5"|