Com-Power Absorbing Clamp CLA-050

Absorbing Clamps measures radio noise power generated and fed through the power cables of these products above 30 MHz and up to 1 GHz.
Article number:
Out of stock
Delivery time:
12 - 15 days
Excl. tax

The CLA-050 ferrite absorbing clamps meet the CISPR 14 (EN 55014) section 6.11 requirement for measuring radio frequency power generated and fed to the EUT supply cable of electrical instruments via their connecting leads.

The use of EMC clamps is a practical alternative to the measurement of direct field strength from equipment under test (EuT) supply cables.

During the test, the EUT is placed on a non-conductive table at least 40 cm from the nearest reflecting object. The EUT mains conductor is placed horizontally in a straight line for a distance sufficient to permit movement of the ferrite clamps to obtain the highest readings. The mains conductor is placed in the absorbing clamp surrounded by ferrite absorbing rings and the current transformer

This absorbing clamp model (CLA-050) can accommodate supply cables up to 10 mm (0.39 inches) in diameter. If 10 mm is not sufficient, you might want to look at our CLA-150 model, which can accept cables up to 32 mm (1.26 inches).

  • Frequency range: 30 MHz to 1000 MHz
  • Test to CISPR14 (EN 55014) requirements
  • Individual Calibration
  • Three Year Warranty

Absorbing Clamp (CLA-050) Insertion loss graph

Absorbing Clamps CLA-050 Insertion Loss Graph
Manufacturer: Com-Power
Model: CLA-050
Application: EMC emissions measurement of electrical instruments
Frequency Range: 30 MHz to 1000 MHz
Impedance: 50 Ω
RF Connectors: BNC (female)
Max. Cable Diameter: 10 mm / 0.39 inches
Aperture Size: 12.7 mm / 0.5 inches
Dimensions: 627 mm x 114 mm x 144 mm / 24.7" x 4.5" x 5.7"
Weight: 5 kg
0 stars based on 0 reviews Add your review
← Return to the back office    This store is under construction Any orders placed will not be honored or fulfilled Hide